High-Pressure Hydraulics

Your supplier for high-pressure pumps

or high/low pressure pumps

Wimmer Pumps

High-pressure pumps with fixed output per revolution and very high volumetric efficiency up to 98%, belonging to the top of the high-pressure hydraulic sector. Create perfect synchronisation of cylinders or hydraulic motors with the multi-output radial piston pumps, thanks to their very high efficiency.  Due to their bidirectional rotation, these pumps can be used universally. Very wide range of speed allowing variable flow rate. Available in combination with under-oil motor for extremely low-noise set-ups. 

PPZ-series

 Smallest in range with 1, 2 or 3 pistons
 Through-drive shaft for 2nd pump available
Number of outputs 1, 2 or 3
 0.21 ccm/rev > 1.77 ccm/rev
 Max pressure 700 Bar
 100 > 3.000 rev/min

PDS-series

 Compact model with 1 or 2 pistons
 Through-drive shaft for 2nd pump available

Number of outputs 1 or 2
0.22 ccm/rev > 3.22 ccm/rev
 Max pressure 700 / 1.000 Bar
 100 > 3.000 rev/min

PZ-series

 Medium compact series with 1, 2, 3 or 5 pistons
 Through-drive shaft for 2nd pump available
Number of outputs 1 to 5
 0.28 ccm/rev > 10.05 ccm/rev
 Max pressure 700 Bar
 100 > 3.000 rev/min

PM-series

 Medium robust series, no throughput (no 2nd pump)
 Affordable & lightweight design
With 2, 3, 4 or 6 pistons and 1 to 6 outputs
 0.59 ccm/rev > 12.06 ccm/rev
 Max pressure 700 Bar
 100 > 3.000 rev/min

PS-series

 Medium sized robust series with end cap in steel
 Through-drive shaft for 2nd pump available
With 2, 3, 4 or 6 pistons and 1 to 6 outputs
 0.59 ccm/rev > 12.06 ccm/rev
 Max pressure 700 / 1.000 Bar
 100 > 3.000 rev/min

PW-series

 Large series
 Through-drive shaft for 2nd pump available
With 4 or 6 pistons and 1 to 6 outputs
 16.50 ccm/rev > 33.19 ccm/rev
 Max pressure 500 Bar
 100 > 1.800 rev/min

Gearpumps

 Size GP1 & GP2
 1,1 ccm/Rev > 28,2 ccm/Rev
Max 250 Bar, depending on max drive shaft load
 Port connections "Flanged"
 Port connections "GAS Straight" on request
Multiple pumps possible - subject to max drive shaft load

Accessories

 Bellhousing with or without damping for standard electric asynchronous motors (IEC-motor)
 Motor and pump shaft centered
Horizontal and vertical applications
 Coupling with high performance siders (up to 98 shoreA)
 Damping rings to reduce noise and vibration

Electromotors

 Standard 1500 or 3000 RPM, other speed on request
 Frequency 50 and 60 Hz, or via frequency converter
Efficiency according IE3 or better
 Intern thermic overload contact (PTC)
 Under-Oil electric motors / Single-Phase or Three-Phase
 Cast Iron or aluminium housing

Download our catalogue

Don't hesitate to download our newest catalogue. In this catalogue we have listed our different pumps with an overview of all specifications and datasheets.

Scroll naar boven